File Manager

X7ROOT File Manager

Current Path: /opt/alt/net-snmp11/usr/share/snmp/mibs

opt / alt / net-snmp11 / usr / share / snmp / mibs /

ðŸ“ ..
ðŸ“„ AGENTX-MIB.txt(17.05 KB)
ðŸ“„ BRIDGE-MIB.txt(49.75 KB)
ðŸ“„ DISMAN-EVENT-MIB.txt(66.51 KB)
ðŸ“„ DISMAN-SCHEDULE-MIB.txt(24.04 KB)
ðŸ“„ DISMAN-SCRIPT-MIB.txt(62.8 KB)
ðŸ“„ EtherLike-MIB.txt(82.51 KB)
ðŸ“„ HCNUM-TC.txt(4.55 KB)
ðŸ“„ HOST-RESOURCES-MIB.txt(51.31 KB)
ðŸ“„ HOST-RESOURCES-TYPES.txt(10.33 KB)
ðŸ“„ IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt(6.56 KB)
ðŸ“„ IANA-LANGUAGE-MIB.txt(4.28 KB)
ðŸ“„ IANA-RTPROTO-MIB.txt(4 KB)
ðŸ“„ IANAifType-MIB.txt(34.55 KB)
ðŸ“„ IF-INVERTED-STACK-MIB.txt(4.95 KB)
ðŸ“„ IF-MIB.txt(70.01 KB)
ðŸ“„ INET-ADDRESS-MIB.txt(16.39 KB)
ðŸ“„ IP-FORWARD-MIB.txt(45.2 KB)
ðŸ“„ IP-MIB.txt(181.32 KB)
ðŸ“„ IPV6-FLOW-LABEL-MIB.txt(1.98 KB)
ðŸ“„ IPV6-ICMP-MIB.txt(20.56 KB)
ðŸ“„ IPV6-MIB.txt(55.14 KB)
ðŸ“„ IPV6-TC.txt(3.08 KB)
ðŸ“„ IPV6-TCP-MIB.txt(8.65 KB)
ðŸ“„ IPV6-UDP-MIB.txt(5.56 KB)
ðŸ“„ LM-SENSORS-MIB.txt(5.79 KB)
ðŸ“„ MTA-MIB.txt(41.38 KB)
ðŸ“„ NET-SNMP-AGENT-MIB.txt(15.53 KB)
ðŸ“„ NET-SNMP-EXAMPLES-MIB.txt(8.95 KB)
ðŸ“„ NET-SNMP-EXTEND-MIB.txt(9.11 KB)
ðŸ“„ NET-SNMP-MIB.txt(1.99 KB)
ðŸ“„ NET-SNMP-PASS-MIB.txt(3.64 KB)
ðŸ“„ NET-SNMP-TC.txt(4.7 KB)
ðŸ“„ NETWORK-SERVICES-MIB.txt(20.51 KB)
ðŸ“„ NOTIFICATION-LOG-MIB.txt(24.12 KB)
ðŸ“„ RFC-1215.txt(1.15 KB)
ðŸ“„ RFC1155-SMI.txt(3 KB)
ðŸ“„ RFC1213-MIB.txt(77.8 KB)
ðŸ“„ RMON-MIB.txt(144.36 KB)
ðŸ“„ SCTP-MIB.txt(44.26 KB)
ðŸ“„ SMUX-MIB.txt(4.54 KB)
ðŸ“„ SNMP-COMMUNITY-MIB.txt(15.13 KB)
ðŸ“„ SNMP-FRAMEWORK-MIB.txt(21.82 KB)
ðŸ“„ SNMP-MPD-MIB.txt(5.37 KB)
ðŸ“„ SNMP-NOTIFICATION-MIB.txt(19.54 KB)
ðŸ“„ SNMP-PROXY-MIB.txt(8.89 KB)
ðŸ“„ SNMP-TARGET-MIB.txt(22.24 KB)
ðŸ“„ SNMP-TLS-TM-MIB.txt(42.9 KB)
ðŸ“„ SNMP-TSM-MIB.txt(8.7 KB)
ðŸ“„ SNMP-USER-BASED-SM-MIB.txt(38.28 KB)
ðŸ“„ SNMP-USM-AES-MIB.txt(2.15 KB)
ðŸ“„ SNMP-USM-DH-OBJECTS-MIB.txt(20.61 KB)
ðŸ“„ SNMP-USM-HMAC-SHA2-MIB.txt(4.3 KB)
ðŸ“„ SNMP-VIEW-BASED-ACM-MIB.txt(33.36 KB)
ðŸ“„ SNMPv2-CONF.txt(8.07 KB)
ðŸ“„ SNMPv2-MIB.txt(28.62 KB)
ðŸ“„ SNMPv2-SMI.txt(8.71 KB)
ðŸ“„ SNMPv2-TC.txt(37.14 KB)
ðŸ“„ SNMPv2-TM.txt(5.64 KB)
ðŸ“„ TCP-MIB.txt(27.89 KB)
ðŸ“„ TRANSPORT-ADDRESS-MIB.txt(16.03 KB)
ðŸ“„ TUNNEL-MIB.txt(27.17 KB)
ðŸ“„ UCD-DEMO-MIB.txt(2.11 KB)
ðŸ“„ UCD-DISKIO-MIB.txt(4.85 KB)
ðŸ“„ UCD-DLMOD-MIB.txt(3.01 KB)
ðŸ“„ UCD-IPFWACC-MIB.txt(7.93 KB)
ðŸ“„ UCD-SNMP-MIB.txt(51.58 KB)
ðŸ“„ UDP-MIB.txt(20.39 KB)

Editing: LM-SENSORS-MIB.txt

LM-SENSORS-MIB DEFINITIONS ::= BEGIN

--
-- Derived from the original VEST-INTERNETT-MIB. Open issues:
--
-- (a) where to register this MIB?
-- (b) use not-accessible for diskIOIndex?
--

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ucdExperimental
        FROM UCD-SNMP-MIB;

lmSensorsMIB MODULE-IDENTITY
    LAST-UPDATED "200011050000Z"
    ORGANIZATION "AdamsNames Ltd"
    CONTACT-INFO    
        "Primary Contact: M J Oldfield
         email:     m@mail.tc"
    DESCRIPTION
        "This MIB module defines objects for lm_sensor derived data."
    REVISION     "200011050000Z"
    DESCRIPTION
        "Derived from DISKIO-MIB ex UCD."
    ::= { lmSensors 1 }

lmSensors      OBJECT IDENTIFIER ::= { ucdExperimental 16 }

lmTempSensorsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF LMTempSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of temperature sensors and their values."
    ::= { lmSensors 2 }

lmTempSensorsEntry OBJECT-TYPE
    SYNTAX      LMTempSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing a device and its statistics."
    INDEX       { lmTempSensorsIndex }
    ::= { lmTempSensorsTable 1 }

LMTempSensorsEntry ::= SEQUENCE {
    lmTempSensorsIndex    Integer32,
    lmTempSensorsDevice   DisplayString,
    lmTempSensorsValue    Gauge32
}

lmTempSensorsIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reference index for each observed device."
    ::= { lmTempSensorsEntry 1 }

lmTempSensorsDevice OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of the temperature sensor we are reading."
    ::= { lmTempSensorsEntry 2 }

lmTempSensorsValue OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The temperature of this sensor in mC."
    ::= { lmTempSensorsEntry 3 }
--

lmFanSensorsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF LMFanSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of fan sensors and their values."
    ::= { lmSensors 3 }

lmFanSensorsEntry OBJECT-TYPE
    SYNTAX      LMFanSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing a device and its statistics."
    INDEX       { lmFanSensorsIndex }
    ::= { lmFanSensorsTable 1 }

LMFanSensorsEntry ::= SEQUENCE {
    lmFanSensorsIndex    Integer32,
    lmFanSensorsDevice   DisplayString,
    lmFanSensorsValue    Gauge32
}

lmFanSensorsIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reference index for each observed device."
    ::= { lmFanSensorsEntry 1 }

lmFanSensorsDevice OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of the fan sensor we are reading."
    ::= { lmFanSensorsEntry 2 }

lmFanSensorsValue OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The rotation speed of the fan in RPM."
    ::= { lmFanSensorsEntry 3 }

lmVoltSensorsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF LMVoltSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of voltage sensors and their values."
    ::= { lmSensors 4 }

lmVoltSensorsEntry OBJECT-TYPE
    SYNTAX      LMVoltSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing a device and its statistics."
    INDEX       { lmVoltSensorsIndex }
    ::= { lmVoltSensorsTable 1 }

LMVoltSensorsEntry ::= SEQUENCE {
    lmVoltSensorsIndex    Integer32,
    lmVoltSensorsDevice   DisplayString,
    lmVoltSensorsValue    Gauge32
}

lmVoltSensorsIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reference index for each observed device."
    ::= { lmVoltSensorsEntry 1 }

lmVoltSensorsDevice OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of the device we are reading."
    ::= { lmVoltSensorsEntry 2 }

lmVoltSensorsValue OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The voltage in mV."
    ::= { lmVoltSensorsEntry 3 }

lmMiscSensorsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF LMMiscSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of miscellaneous sensor devices and their values."
    ::= { lmSensors 5 }

lmMiscSensorsEntry OBJECT-TYPE
    SYNTAX      LMMiscSensorsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing a device and its statistics."
    INDEX       { lmMiscSensorsIndex }
    ::= { lmMiscSensorsTable 1 }

LMMiscSensorsEntry ::= SEQUENCE {
    lmMiscSensorsIndex    Integer32,
    lmMiscSensorsDevice   DisplayString,
    lmMiscSensorsValue    Gauge32
}

lmMiscSensorsIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reference index for each observed device."
    ::= { lmMiscSensorsEntry 1 }

lmMiscSensorsDevice OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of the device we are reading."
    ::= { lmMiscSensorsEntry 2 }

lmMiscSensorsValue OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of this sensor."
    ::= { lmMiscSensorsEntry 3 }

END

X7ROOT File Manager

Editing: LM-SENSORS-MIB.txt

Upload File

Create Folder