File Manager

X7ROOT File Manager

Current Path: /opt/alt/libicu65/usr/include/unicode

opt / alt / libicu65 / usr / include / unicode /

ðŸ“ ..
ðŸ“„ alphaindex.h(26.48 KB)
ðŸ“„ appendable.h(8.49 KB)
ðŸ“„ basictz.h(9.15 KB)
ðŸ“„ brkiter.h(27.8 KB)
ðŸ“„ bytestream.h(9.6 KB)
ðŸ“„ bytestrie.h(20.77 KB)
ðŸ“„ bytestriebuilder.h(7.08 KB)
ðŸ“„ calendar.h(105.74 KB)
ðŸ“„ caniter.h(7.43 KB)
ðŸ“„ casemap.h(25.33 KB)
ðŸ“„ char16ptr.h(7.22 KB)
ðŸ“„ chariter.h(24.05 KB)
ðŸ“„ choicfmt.h(23.91 KB)
ðŸ“„ coleitr.h(13.76 KB)
ðŸ“„ coll.h(56.23 KB)
ðŸ“„ compactdecimalformat.h(6.88 KB)
ðŸ“„ curramt.h(3.76 KB)
ðŸ“„ currpinf.h(7.3 KB)
ðŸ“„ currunit.h(4.05 KB)
ðŸ“„ datefmt.h(40.67 KB)
ðŸ“„ dbbi.h(1.19 KB)
ðŸ“„ dcfmtsym.h(20.13 KB)
ðŸ“„ decimfmt.h(87.38 KB)
ðŸ“„ docmain.h(6.97 KB)
ðŸ“„ dtfmtsym.h(37.7 KB)
ðŸ“„ dtintrv.h(3.84 KB)
ðŸ“„ dtitvfmt.h(46.63 KB)
ðŸ“„ dtitvinf.h(18.51 KB)
ðŸ“„ dtptngen.h(25.08 KB)
ðŸ“„ dtrule.h(8.68 KB)
ðŸ“„ edits.h(20.74 KB)
ðŸ“„ enumset.h(2.08 KB)
ðŸ“„ errorcode.h(4.84 KB)
ðŸ“„ fieldpos.h(8.69 KB)
ðŸ“„ filteredbrk.h(5.37 KB)
ðŸ“„ fmtable.h(24.42 KB)
ðŸ“„ format.h(12.5 KB)
ðŸ“„ formattedvalue.h(10.27 KB)
ðŸ“„ fpositer.h(3.04 KB)
ðŸ“„ gender.h(3.33 KB)
ðŸ“„ gregocal.h(31.71 KB)
ðŸ“„ icudataver.h(1.03 KB)
ðŸ“„ icuplug.h(11.88 KB)
ðŸ“„ idna.h(12.7 KB)
ðŸ“„ listformatter.h(9.47 KB)
ðŸ“„ localebuilder.h(11.27 KB)
ðŸ“„ localematcher.h(22.5 KB)
ðŸ“„ localpointer.h(19.69 KB)
ðŸ“„ locdspnm.h(7.12 KB)
ðŸ“„ locid.h(47.4 KB)
ðŸ“„ measfmt.h(11.33 KB)
ðŸ“„ measunit.h(93.31 KB)
ðŸ“„ measure.h(4.32 KB)
ðŸ“„ messagepattern.h(33.71 KB)
ðŸ“„ msgfmt.h(44.11 KB)
ðŸ“„ normalizer2.h(34.03 KB)
ðŸ“„ normlzr.h(30.94 KB)
ðŸ“„ nounit.h(2.69 KB)
ðŸ“„ numberformatter.h(86.31 KB)
ðŸ“„ numberrangeformatter.h(30.14 KB)
ðŸ“„ numfmt.h(49.81 KB)
ðŸ“„ numsys.h(7.19 KB)
ðŸ“„ parseerr.h(3.08 KB)
ðŸ“„ parsepos.h(5.56 KB)
ðŸ“„ platform.h(28.08 KB)
ðŸ“„ plurfmt.h(25.2 KB)
ðŸ“„ plurrule.h(18.39 KB)
ðŸ“„ ptypes.h(3.49 KB)
ðŸ“„ putil.h(6.33 KB)
ðŸ“„ rbbi.h(26.58 KB)
ðŸ“„ rbnf.h(48.73 KB)
ðŸ“„ rbtz.h(15.6 KB)
ðŸ“„ regex.h(84.36 KB)
ðŸ“„ region.h(9.18 KB)
ðŸ“„ reldatefmt.h(22.62 KB)
ðŸ“„ rep.h(9.37 KB)
ðŸ“„ resbund.h(18.07 KB)
ðŸ“„ schriter.h(6.32 KB)
ðŸ“„ scientificnumberformatter.h(6.4 KB)
ðŸ“„ search.h(22.22 KB)
ðŸ“„ selfmt.h(14.3 KB)
ðŸ“„ simpleformatter.h(12.59 KB)
ðŸ“„ simpletz.h(45.44 KB)
ðŸ“„ smpdtfmt.h(70.97 KB)
ðŸ“„ sortkey.h(11.18 KB)
ðŸ“„ std_string.h(1.05 KB)
ðŸ“„ strenum.h(9.92 KB)
ðŸ“„ stringoptions.h(5.79 KB)
ðŸ“„ stringpiece.h(7.38 KB)
ðŸ“„ stringtriebuilder.h(15.33 KB)
ðŸ“„ stsearch.h(21.3 KB)
ðŸ“„ symtable.h(4.27 KB)
ðŸ“„ tblcoll.h(36.61 KB)
ðŸ“„ timezone.h(41.02 KB)
ðŸ“„ tmunit.h(3.38 KB)
ðŸ“„ tmutamt.h(4.9 KB)
ðŸ“„ tmutfmt.h(7.85 KB)
ðŸ“„ translit.h(65.82 KB)
ðŸ“„ tzfmt.h(42.89 KB)
ðŸ“„ tznames.h(16.85 KB)
ðŸ“„ tzrule.h(35.37 KB)
ðŸ“„ tztrans.h(6.12 KB)
ðŸ“„ ubidi.h(89.56 KB)
ðŸ“„ ubiditransform.h(12.65 KB)
ðŸ“„ ubrk.h(23.97 KB)
ðŸ“„ ucal.h(56.9 KB)
ðŸ“„ ucasemap.h(15.18 KB)
ðŸ“„ ucat.h(5.36 KB)
ðŸ“„ uchar.h(140.56 KB)
ðŸ“„ ucharstrie.h(22.58 KB)
ðŸ“„ ucharstriebuilder.h(7.21 KB)
ðŸ“„ uchriter.h(13.2 KB)
ðŸ“„ uclean.h(11.21 KB)
ðŸ“„ ucnv.h(83.09 KB)
ðŸ“„ ucnv_cb.h(6.59 KB)
ðŸ“„ ucnv_err.h(20.99 KB)
ðŸ“„ ucnvsel.h(6.14 KB)
ðŸ“„ ucol.h(61.46 KB)
ðŸ“„ ucoleitr.h(9.46 KB)
ðŸ“„ uconfig.h(12.07 KB)
ðŸ“„ ucpmap.h(5.53 KB)
ðŸ“„ ucptrie.h(22.46 KB)
ðŸ“„ ucsdet.h(14.67 KB)
ðŸ“„ ucurr.h(16.12 KB)
ðŸ“„ udat.h(60.88 KB)
ðŸ“„ udata.h(15.56 KB)
ðŸ“„ udateintervalformat.h(10.03 KB)
ðŸ“„ udatpg.h(26.01 KB)
ðŸ“„ udisplaycontext.h(5.89 KB)
ðŸ“„ uenum.h(7.78 KB)
ðŸ“„ ufieldpositer.h(4.36 KB)
ðŸ“„ uformattable.h(10.94 KB)
ðŸ“„ uformattedvalue.h(12.14 KB)
ðŸ“„ ugender.h(2 KB)
ðŸ“„ uidna.h(33.37 KB)
ðŸ“„ uiter.h(22.77 KB)
ðŸ“„ uldnames.h(10.45 KB)
ðŸ“„ ulistformatter.h(8.83 KB)
ðŸ“„ uloc.h(52.54 KB)
ðŸ“„ ulocdata.h(11.26 KB)
ðŸ“„ umachine.h(14.53 KB)
ðŸ“„ umisc.h(1.33 KB)
ðŸ“„ umsg.h(24.23 KB)
ðŸ“„ umutablecptrie.h(8.24 KB)
ðŸ“„ unifilt.h(3.96 KB)
ðŸ“„ unifunct.h(4.04 KB)
ðŸ“„ unimatch.h(6.1 KB)
ðŸ“„ unirepl.h(3.38 KB)
ðŸ“„ uniset.h(64.9 KB)
ðŸ“„ unistr.h(170.43 KB)
ðŸ“„ unorm.h(20.52 KB)
ðŸ“„ unorm2.h(24.66 KB)
ðŸ“„ unum.h(53.62 KB)
ðŸ“„ unumberformatter.h(25.36 KB)
ðŸ“„ unumsys.h(7.21 KB)
ðŸ“„ uobject.h(10.68 KB)
ðŸ“„ upluralrules.h(7.88 KB)
ðŸ“„ uregex.h(72.05 KB)
ðŸ“„ uregion.h(9.84 KB)
ðŸ“„ ureldatefmt.h(17.26 KB)
ðŸ“„ urename.h(130.97 KB)
ðŸ“„ urep.h(5.38 KB)
ðŸ“„ ures.h(36.54 KB)
ðŸ“„ uscript.h(26.87 KB)
ðŸ“„ usearch.h(38.12 KB)
ðŸ“„ uset.h(40 KB)
ðŸ“„ usetiter.h(9.55 KB)
ðŸ“„ ushape.h(18 KB)
ðŸ“„ uspoof.h(65.9 KB)
ðŸ“„ usprep.h(8.14 KB)
ðŸ“„ ustdio.h(38.54 KB)
ðŸ“„ ustream.h(1.89 KB)
ðŸ“„ ustring.h(72.47 KB)
ðŸ“„ ustringtrie.h(3.15 KB)
ðŸ“„ utext.h(58.13 KB)
ðŸ“„ utf.h(7.86 KB)
ðŸ“„ utf16.h(23.32 KB)
ðŸ“„ utf32.h(763 B)
ðŸ“„ utf8.h(30.96 KB)
ðŸ“„ utf_old.h(45.83 KB)
ðŸ“„ utmscale.h(13.78 KB)
ðŸ“„ utrace.h(15.73 KB)
ðŸ“„ utrans.h(25.52 KB)
ðŸ“„ utypes.h(30.74 KB)
ðŸ“„ uvernum.h(6.67 KB)
ðŸ“„ uversion.h(6 KB)
ðŸ“„ vtzone.h(20.3 KB)

Editing: ucnv_cb.h

// © 2016 and later: Unicode, Inc. and others.
// License & terms of use: http://www.unicode.org/copyright.html
/*
**********************************************************************
*   Copyright (C) 2000-2004, International Business Machines
*   Corporation and others.  All Rights Reserved.
**********************************************************************
 *  ucnv_cb.h:
 *  External APIs for the ICU's codeset conversion library
 *  Helena Shih
 * 
 * Modification History:
 *
 *   Date        Name        Description
 */

/**
 * \file 
 * \brief C UConverter functions to aid the writers of callbacks
 *
 * <h2> Callback API for UConverter </h2>
 * 
 * These functions are provided here for the convenience of the callback
 * writer. If you are just looking for callback functions to use, please
 * see ucnv_err.h.  DO NOT call these functions directly when you are 
 * working with converters, unless your code has been called as a callback
 * via ucnv_setFromUCallback or ucnv_setToUCallback !!
 * 
 * A note about error codes and overflow.  Unlike other ICU functions,
 * these functions do not expect the error status to be U_ZERO_ERROR.
 * Callbacks must be much more careful about their error codes.
 * The error codes used here are in/out parameters, which should be passed
 * back in the callback's error parameter.
 * 
 * For example, if you call ucnv_cbfromUWriteBytes to write data out 
 * to the output codepage, it may return U_BUFFER_OVERFLOW_ERROR if 
 * the data did not fit in the target. But this isn't a failing error, 
 * in fact, ucnv_cbfromUWriteBytes may be called AGAIN with the error
 * status still U_BUFFER_OVERFLOW_ERROR to attempt to write further bytes,
 * which will also go into the internal overflow buffers.
 * 
 * Concerning offsets, the 'offset' parameters here are relative to the start
 * of SOURCE.  For example, Suppose the string "ABCD" was being converted 
 * from Unicode into a codepage which doesn't have a mapping for 'B'.
 * 'A' will be written out correctly, but
 * The FromU Callback will be called on an unassigned character for 'B'.
 * At this point, this is the state of the world:
 *    Target:    A [..]     [points after A]
 *    Source:  A B [C] D    [points to C - B has been consumed]
 *             0 1  2  3 
 *    codePoint = "B"       [the unassigned codepoint] 
 * 
 * Now, suppose a callback wants to write the substitution character '?' to
 * the target. It calls ucnv_cbFromUWriteBytes() to write the ?. 
 * It should pass ZERO as the offset, because the offset as far as the 
 * callback is concerned is relative to the SOURCE pointer [which points 
 * before 'C'.]  If the callback goes into the args and consumes 'C' also,
 * it would call FromUWriteBytes with an offset of 1 (and advance the source
 * pointer).
 *
 */

#ifndef UCNV_CB_H
#define UCNV_CB_H

#include "unicode/utypes.h"

#if !UCONFIG_NO_CONVERSION

#include "unicode/ucnv.h"
#include "unicode/ucnv_err.h"

/**
 * ONLY used by FromU callback functions.
 * Writes out the specified byte output bytes to the target byte buffer or to converter internal buffers.
 *
 * @param args callback fromUnicode arguments
 * @param source source bytes to write
 * @param length length of bytes to write
 * @param offsetIndex the relative offset index from callback.
 * @param err error status. If <TT>U_BUFFER_OVERFLOW</TT> is returned, then U_BUFFER_OVERFLOW <STRONG>must</STRONG> 
 * be returned to the user, because it means that not all data could be written into the target buffer, and some is 
 * in the converter error buffer.
 * @see ucnv_cbFromUWriteSub
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2
ucnv_cbFromUWriteBytes (UConverterFromUnicodeArgs *args,
                        const char* source,
                        int32_t length,
                        int32_t offsetIndex,
                        UErrorCode * err);

/**
 * ONLY used by FromU callback functions.  
 * This function will write out the correct substitution character sequence 
 * to the target.
 *
 * @param args callback fromUnicode arguments
 * @param offsetIndex the relative offset index from the current source pointer to be used
 * @param err error status. If <TT>U_BUFFER_OVERFLOW</TT> is returned, then U_BUFFER_OVERFLOW <STRONG>must</STRONG> 
 * be returned to the user, because it means that not all data could be written into the target buffer, and some is 
 * in the converter error buffer.
 * @see ucnv_cbFromUWriteBytes
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 
ucnv_cbFromUWriteSub (UConverterFromUnicodeArgs *args,
                      int32_t offsetIndex,
                      UErrorCode * err);

/**
 * ONLY used by fromU callback functions.  
 * This function will write out the error character(s) to the target UChar buffer.
 *
 * @param args callback fromUnicode arguments
 * @param source pointer to pointer to first UChar to write [on exit: 1 after last UChar processed]
 * @param sourceLimit pointer after last UChar to write
 * @param offsetIndex the relative offset index from callback which will be set
 * @param err error status <TT>U_BUFFER_OVERFLOW</TT>
 * @see ucnv_cbToUWriteSub
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 ucnv_cbFromUWriteUChars(UConverterFromUnicodeArgs *args,
                             const UChar** source,
                             const UChar*  sourceLimit,
                             int32_t offsetIndex,
                             UErrorCode * err);

/**
 * ONLY used by ToU callback functions.
 *  This function will write out the specified characters to the target 
 * UChar buffer.
 *
 * @param args callback toUnicode arguments
 * @param source source string to write
 * @param length the length of source string
 * @param offsetIndex the relative offset index which will be written.
 * @param err error status <TT>U_BUFFER_OVERFLOW</TT>
 * @see ucnv_cbToUWriteSub
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 ucnv_cbToUWriteUChars (UConverterToUnicodeArgs *args,
                                             const UChar* source,
                                             int32_t length,
                                             int32_t offsetIndex,
                                             UErrorCode * err);

/**
 * ONLY used by ToU  callback functions.  
 * This function will write out the Unicode substitution character (U+FFFD).
 *
 * @param args callback fromUnicode arguments
 * @param offsetIndex the relative offset index from callback.
 * @param err error status <TT>U_BUFFER_OVERFLOW</TT>
 * @see ucnv_cbToUWriteUChars
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 ucnv_cbToUWriteSub (UConverterToUnicodeArgs *args,
                       int32_t offsetIndex,
                       UErrorCode * err);
#endif

#endif

X7ROOT File Manager

Editing: ucnv_cb.h

Upload File

Create Folder